Superior Performance. Supor EKV filters feature 0.2-micron-rated validated sterilizing-grade membranes. With standard 5- and 10-inch format filters utilizing a laid-over-pleat membrane geometry in capsules and cartridges for high flow rates and throughput performance, their PES membrane ensures very high compatibility over the whole pH range
Catalog number: 199-2020. Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample
The filters can be sterilized by autoclaving for up to 25 cycles at 275°F/135°C. The filters can also be sterilized by steam-in-place procedure up to 25 cycles at 287.6°F/142°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow rates and throughput, low extractables and particle
Selecting the right gas or vent filter. Aervent ® filters contain sterilizing-grade 0.2 µm hydrophobic polytetrafluoroethylene (PTFE) membrane. These filters are used in bioprocessing applications where it is critical to use a phobic filter with validated bacterial and viral retention capabilities.
Antibodies & Assays Trust in one of the most highly published & validated portfolios of antibodies. Sterile Filtration Good cell culture practices start with proven products like Stericup® and Millex® filters. Reagents, Chemicals and Labware. Cleaning of Lab Equipment. Inorganic Reagents.
Emflon PFRW cartridges are sterilizing grade hydrophobic membrane filters designed for reliable retention of bacteria and high levels of phages in compressed gas and vent applications. The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges.
In-Line Steam Sterilization Max. 134 °C, 0.3 bar, 20 min Min. 25 Sterilization Cycles or Autoclaving Max. 134°C, 2 bar, 30 min Min. 25 Sterilization Cycles Maxicaps® | Midicaps® | Capsules Autoclaving Max. 134°C, 2 bar, 30 min Min. 25 Sterilization Cycles (Maxicaps® | Midicaps®) Min. 3 Sterilization Cylcles (Capsules) T-Style Maxicaps
0.2 µm Filter Diameter ⌀ 47 mm $493.00 Hydrophobic PTFE Membrane Filters / Type 11806 25 Pieces Item no. 11806-100------G Pore Size 0.45 µm Filter Diameter ⌀ 100 mm $493.00 Hydrophobic PTFE Membrane Filters / Type 11803 100 Pieces Item no. 11803--13------N Pore Size 1.2 µm Filter Diameter ⌀ 13 mm $329.00
Superior Performance. Supor EKV filters feature 0.2-micron-rated validated sterilizing-grade membranes. With standard 5- and 10-inch format filters utilizing a laid-over-pleat membrane geometry in capsules and cartridges for high flow rates and throughput performance, their PES membrane ensures very high compatibility over the whole pH range
Description. The Pall Acro 50 is a disposable0.2 micron sterile vent filter and contains a Pall hydrophobic PTFE membrane, and is ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates, and filters can be autoclaved several times, ensuring low costs.
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high
Isopore Membrane Filter. 0.2 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameter. 0.2 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameter. 0.2 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameter. 0.2 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameter.
