Isopore Membrane Filter. 0.2 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameter. 0.2 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameter. 0.2 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameter. 0.2 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameter.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
0.2 µm µm nominal Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Quantity 50 pkg Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi)
The Pall Acro 50 is a disposable0.2 micron sterile vent filter and contains a Pall hydrophobic PTFE membrane, and is ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates, and filters can be autoclaved several times, ensuring low costs. Features
MILLEX® Sterile Syringe Filters Hydrophilic PTFE Membranes MilliporeSigma A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Related Products: Hydrophilic Filter Compare this item
Feb 20, 2010 · The Whatman ReZist air venting syringe filter is specifically designed for aerosol separation and venting. Features an integral hydrophobic PTFE filter to retain fine contaminants. Inlet/Outlet: TN/TN. PTFE. Diameter: 50mm. 0.2µm. 50/Pack. Whatman #: 10463609.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17844 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.
May 21, 2019 · Make sure this fits by entering your model number. 50MM PTFE INLET SYRINGE FILTER: 50mm 0.22um or 0.45um PTFE Inlet Syringe Filters, Hydrophobic PTFE membrane is laminated with polypropylene. 50MM PTFE MAIN APPLICATION: Naturally hydrophobic PTFE membrane provides the best chemical resistance, and can be used forventing applications or filtering gases , individually wrapped filters.
Advantec – Mfr # 25HP020AN – Item # EW-81054-42. Housings are specifically designed to minimize sample holdup and maximize recovery. Non-pigmented acrylic or polypropylene (PP) housings feature integral filter sealing to avoid the risk of contamination from pigments and adhesives. Each filter is clearly marked with membrane pore size.
Flasks are made of lightweight clear PETG with molded-in graduations. High-density polyethylene closure uses a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Capacities range from 125 to 2000 mL . Individually packaged for easy storage and handling.
Product Number 431227. E-mail Print. Quality Certificate. These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance. These naturally hydrophobic membranes can be used for venting applications or filtering gases. 100% integrity tested, sterile and nonpyrogenic and noncytotoxic.
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Ethylene Oxide, Female Luer Lock, Needle (38 × 1.7 mm), Pack Size 50 Added to Shopping Cart Minisart ® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12.
The PTFE membrane in these syringe filters is a hydrophobic, chemically stable, and inert. It exhibits low protein binding, and is perfect for the filtration of non-aqueous samples. Regular Price $214.04 Price $186.12. Add to Cart.
Whatman syringe filters can be found in different diameters, pore sizes, and membrane types. Select from sterile or nonsterile versions without or with prefilters.Syringe filters are the primary option for analytical sample filtration. Whatman Puradisc 25 mm PES Syringe Filters, 0.2 µm, 50 Pack, 6780-2502 Regular Price $125.64 Price $109.26
