Membane filter

Titan3™ PTFE (Hydrophobic) Syringe Filters Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk. Acrodisc® Syringe Filters with PTFE Membrane – Pall Corporation The syringe filters are HPLC certified for low levels of UV-absorbing extractables, prevent...

Chemical Compatibility of Filter Components – Millex addition, solvent-membrane compatibility requires additional consideration of filtration-specific factors. None of these published compatibility guides, for example, monitors the solvent’s ability to wet a membrane or increase extractables. 4. This table does not consider solvent safety issues. Millex-LG, 0.20 µm | SLLG025SS – Merck Millipore SLLG025SS. Millipore. Millex-LG, 0.20 µm. Download. Zoom. A 25 mm diameter sterile syr...

Shop PTFE CR, Acrodisc Syringe Filter | WAT200506 | Waters PTFE CR, Acrodisc Syringe Filter, 13 mm, 0.2 µm, 100/pk Easily carry out the extraction and filtration of abrasive liquids and organics by using the PTFE CR Acrodisc Syringe Filter. The lab apparatus has been certified for HPLC to ensure low extractables and provides high-quality filtering for analytic samples. Filter Membranes – Sigma-Aldrich MF-Millipore ® Membrane Filter, 0.22 µm pore size, 25 mm diameter, mixed cellulose es...

Acrodisc® PSF Syringe Filters The GxF Acrodisc PSF syringe filter has a serial glass fiber pre – filter to allow for maximum throughput and faster flow rates than standard glass fiber prefilter devices. The multi-layered prefilter traps particulate rated from > 40 to 1 µm. Figure 2 The Acrodisc PSF Syringe Filter Figure 3 Comparison of Syringe Filters Automation Titan3™ PES (Polyethersulfone) Syringe Filters Titan3™ PES (Polyethersulfone) Syringe Filters. Adding a syringe filtration st...

Acrodisc® Syringe Filters, 13 mm, Pall Laboratory | VWR Acrodisc® Syringe Filters, 13 mm, Pall Laboratory. These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Available with Minispike outlet to prevent ‘air bubble’ lock in autosample vials and NMR tubes. Polypropylene housing with female Luer inlet and male slip outlet connections. Pall Acrodisc Syringe Filters with Universal wwPTFE Membranes 13 mm Acrodisc syringe filter with minis...

Whatman™ Puradisc™ Syringe Filters – PVDF | Cytiva Whatman™ Puradisc™ syringe filters from Cytiva combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml. Eight different material options. Choice of 4 mm, 13 mm, and 30 mm syringe filter diameter to suit sample volume. See full list on cytivalifesciences.com Whatman Uniflo Syringe Filters – Thomas Sci Whatman Uniflo Syringe Filters – consistent performanc...

Choosing the Best Syringe Filters for Biological Sample Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120 Corning® 15 mm Diameter Syringe Filters, 0.2 µm Pore RC These Corning® syringe filters have polypropylene copolyme...

Corning Filtration Guide prefiltration of solutions and solvents is best accomplished with 0.45 µm or larger filter membranes. Prefiltration to improve filter performance can also be accomplished by the use of glass fiber prefilters that can be purchased separately. Use Table 1 to match your applications with a recommended membrane and pore size. Table 1. Selecting PTFE Syringe Filters – Pall Corporation The PSF syringe filter has larger effective filtration area compared with the old...

Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm | SLFG55010 SLFG55010 Millipore Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm Download Zoom A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. SDS Corning® 25 mm Diameter Syringe Filters, 0.2 µm Pore NY These Corning® syringe filters ha...

high flow rate 0.22 um PTFE syringe filter Restek-HPLC Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are. Related Products: 0.45 Ptfe Filter. RESTEK 26146 Syringe Filter, 13 mm Diameter, 0.22 µm Porosity Jan 3, 2017 · RESTEK 26146 Syringe Filte...