The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
Fluorodyne® II DFL Membrane in Kleenpak™ Capsules. These validated 0.2 micron-rated sterilizing grade filters retain Brevundimonas diminuta (ATCC 19146) at 10 7 CFU/cm² effective filter area (EFA) and ensure very low extractables and adsorption. They are recommended for sterilizing filtration of pharmaceutical fluids including solutions
Sartopore ® 2 is the industry standard of high-performance polyethersulfone (PES) liquid filters. A broad variety of different pore size combinations ensures highly economic and safe filtration performance. From single-layer high flow solutions to specific Mycoplasma retentive filters, Sartopore ® 2 perfectly adapts to your specific process
The filter element features Pall’s proprietary 0.2 micron polytetrafluoroethylene (PTFE) membrane, pleated to give high area in single open-end cartridges. Emflon PFAW cartridges offer exceptionally high flow rates to ensure low installation, operating, and compressor energy costs.
The Pall Acro 50 is a disposable0.2 micron sterile vent filter and contains a Pall hydrophobic PTFE membrane, and is ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates, and filters can be autoclaved several times, ensuring low costs. Features
MF-Millipore ® Membrane Filter, 0.22 µm pore size, 25 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs Expand JGWP04700 Omnipore Membrane Filter, 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter Expand Page 1 of 47 MEMBRANE FILTER CHARACTERISTICS
MF-Millipore ® Membrane Filter, 0.22 µm pore size, 25 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs 0.22 μm pore size 75 % porosity Expand GTTP04700 Isopore ™ Membrane Filter, 0.2 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameter 0.22 μm pore size 13.8 % porosity Expand NY2004700
Overview Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency.
SLFG05010. Millipore. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. CoQ SLFG025LS 50 Price could not be retrieved Recommended Products Overview
Flasks are made of lightweight clear PETG with molded-in graduations. High-density polyethylene closure uses a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Capacities range from 125 to 2000 mL . Individually packaged for easy storage and handling.
Gravimetric Analysis Membrane Filter, 0.22 µm, mixed cellulose esters with thin pad, 37 mm, white. A 0.22 µm pore size non-sterile filter validated for air monitoring. With biologically inert mixtures of cellulose acetate & cellulose nitrate, MF-Millipore membranes are widely used in analytical & research applications.
Overview Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency.
