From microfiltration through to 160 bar high pressure reverse osmosis: Our MembraLine® membrane housings enjoy an outstanding reputation in the filtration REQUEST QUOTE We manufacture stainless steel plants and also produce pressure vessels as membrane housings, and customised pressure and storage tanks.
As a membrane filter manufacturer, Hawach provides a series of pore sizes (0.1μm, 0.22μm, 0.45μm, 1.0μm, 3.0μm, 5.0μm, 10μm), high porosity, large dirt holding capacity, recoil and high-temperature disinfection; good pressure resistance. Thin, and highly porous, our PTFE disc membrane has OEM service and their sizes could be customized. See full list on hawachmembrane.com
Filters (4641K36 to K43) MicronSep nitrocellulose (MCE) filters are composed of a mixture of inert cellulose nitrate and cellulose acetate polymers. The uniform microporous structure of these filters provides the fastest flow rates and highest throughputs available in a membrane filter.
Durapore® Membrane Filter, 0.22 µm: Background Information: Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits
high flow rate ptfe 0.22 micron filter for petrochemicals PTFE Syringe Filters - Polytetrafluoroethylene Syringe Filters We have Best quality of PTFE syringe filters available ex stock in all sizes and micron sizes are 13mm, 25 mm, micron rating : 0.22, 0.45 micron also available in 50 mm disc for Vent filter applications
MultiScreen HTS Vacuum Manifold, The MultiScreen ® HTS Vacuum Manifold is designed for use with 96-well plate and 384-well plate MultiScreenHTS filter and collection plates. MultiScreen ® HTS IP Filter Plate, 0.45 m, white, sterile, Sterile, white 96-well filter plate with 0.45 um pore size Hydrophobic PVDF membrane for ELISPOT Assays. Comes
Membrane filters serve as effective physical barriers that remove solids, viruses, bacteria, and other unwanted molecules. Specialized types are designed for softening, disinfecting, organic removal processing, and water desalination. The filters can be installed in compact, automated, or modular units. These strainers can be used as separators
Faster flow rate: The larger filter surface area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe. Higher operating pressure: Millex filters have a maximum housing pressure of 10.5 bar (150 psig), which means you can filter solutions faster than before.
0.22 µm pore size, hydrophilic PVDF, 25 mm membrane Durapore® Membrane Filter, 0.22 µm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. SDS View Products on Sigmaaldrich.com GVWP02500 PVDF, Hydrophilic, 0.22 µm, 25 mm, white, plain, 100 Price could not be retrieved Recommended Products
Fluoropore Membrane Filter. Background Information. Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore™ membranes provide broad chemical compatibility, high flow rates and consistency.
For flow rates up to 15 LPM we offer our GMS205 Series. This series uses the same user friendly design as the GMS105 series, but with a larger membrane. The increased surface area provides higher flows and also increases the time between service intervals. Our standard assemblies are machined from 316L stainless steel and supplied with Viton seals. Each assembly is supplied with an Hydrophobic
MF-Millipore ® Membrane Filter, 0.22 µm pore size, 25 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs 0.22 μm pore size 75 % porosity Expand GTTP04700 Isopore ™ Membrane Filter, 0.2 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameter 0.22 μm pore size 13.8 % porosity Expand HNWP04700
