28㎜ Disposable syringe filter is available with a PES, CA or hydrophilic PTFE membrane, all come with a polypropylene housing. The CA and PES membranes are suitable for fi ltration of aqueous and alcohols while the PTFE menbrane can also be used with organic solvents. 30% larger fi ltration area when compared with a 25㎜ fi lter unit
28㎜ Disposable syringe filter is available with a PES, CA or hydrophilic PTFE membrane, all come with a polypropylene housing. The CA and PES membranes are suitable for filtration of aqueous and alcohols while the PTFE membrane can also be used with organic solvents. 30% larger filtration area when compared with a 25㎜ filter unit
Concentrate samples <2mL with built-in polysulfone membrane. Clear housing enables visual confirmation of filtration process. Operation: Dispense sample into retentive cell by pipet. Secure cap. Using a syringe, pressurize the unit with air. When filtration is complete, disassemble unit and concentrated sample/filtrate can be analyzed.
The unit is constructed of polypropylene cap, acrylic retentive cell, and filtrate cell. Filter media is polysulfone. To use, simply dispense sample into the retentive cell by pipette, place cap on retentive cell, and inject 10 mL of air with a syringe. Remove cap to stop filtration. Sterilization: 25% ethanol, 5% formalin. MORE +
About Us Contact Us Disposable Ultrafilter Units Advantec Disposable Ultrafiltration Units concentrate up to 2 mL samples simply and with easy clean-up. Units have a built-in polysulfone ultrafilter and are offered in 10K, 50K, or 200K MWCO. Easy to use units require only syringe pressurization and do not require a centrifuge.
Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic (AC) and Polypropylene (PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated.
Supplier: Advantec. Advantec's USY series disposable ultrafiltration units offers maximum sample recovery with a low absorption polysulfone membrane. MWC: 10, 50, 200 kDa. Easy to use: simple operation requires only syringe pressurization. Concentrate samples <2 ml with built-in polysulfone membrane. Clear housing enables visual confirmation of filtration process.
Advantec Syringe Filters "Dismic" are versatile, ready-to-use devices that offer convenience and efficiency to sample cleanup. Advantec offers a wide selection of sizes and membrane filters to suit your application. Mixed Cellulose Esters (MCE) Syringe Filter
The unit is constructed of polypropylene cap, acrylic retentive cell, and filtrate cell. Filter media is polysulfone. To use, simply dispense sample into the retentive cell by pipette, place cap on retentive cell, and inject 10 mL of air with a syringe. Remove cap to stop filtration. Sterilization: 25% ethanol, 5% formalin. Write the First Review
