light turquoise, purple. PTFE/silicone septa. 5040-4682. PTFE-lined solid top screw caps for 2 mL vials, 5183-2075. Polypropylene caps with bonded septa,.
light turquoise, purple. PTFE/silicone septa. 5040-4682. PTFE-lined solid top screw caps for 2 mL vials, 5183-2075. Polypropylene caps with bonded septa,.
VIALS. 13 - 26. Sample Vials. Autosampler Vials, Caps, Septa, and Inserts Vial Kit, Crimp Cap, 2 mL Clear + PTFE/Silicone, preSlit. AR0-9727-13.
Mass Spec Vials are available with or without graduated marking spots. You may choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Our
closure provides a halogen and rubber-free sample handling environment for HPLC applications or applications where silicones or rubber septa are.
PTFE/Silicone septa are ideal for use in most HPLC and forms when a large volume of sample is withdrawn from a vial. This.
WHEATON offers the most comprehensive line of ampules, vials (Septa of 5 mils of PTFE facing 120 mils of silicone is bonded to cap.) W224609.
27.25 x 57.5mm, 5 dram (20mL) Clear Borosilicate Glass Vial with 24-400 Green PP Hole Cap & PTFE/Silicone Septa attached. Clear vials offer maximum
With the largest portfolio of sample handling; vials, plates and closures, column chemistries in a Bonded Clear PTFE/Clear Silicone MSCERT5000-30LVW.
for particulates while the HPLC the need for a sample vial with minimal ... Bonded Clear PTFE/Clear Silicone, Pre-slit MSCERT5000-36LVW.
Sample 3: New clear glass 9 mm vials (C4000-1W) and new closures with PTFE/silicone septa (C5000-54B) were provided by. Thermo Scientific™ National™ as
Bi-layer include silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. Screw caps provide an inert, airtight seal
Description: USP Type-1 borosillicate glass vials , PP caps with PTFE/Silicone septa, bonded/non bonded, compatible universally on all HPLC autosampleres,
100" PTFE/Silicone Septa. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard)
Closures with Pre-Cut Septa for HPLC Applications . target area for adding or removing the sample to the vial. ... PTFE/ silicone septum (bonded to cap).
After completing the MS Certified vial cleaning Assembled Kit, 13-425 Screw 4 mL clear ID Vial, Black Cap, Bonded Clear PTFE/Clear Silicone Septa.