Polymer-Labs Fit all 2.0 mL, 12 x 32 mm, crimp-top vial-based autosamplers. ... Clear 2.0 mL Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Septa.
Polymer-Labs Fit all 2.0 mL, 12 x 32 mm, crimp-top vial-based autosamplers. ... Clear 2.0 mL Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Septa.
within four hours of contact with the vial causing nearly 40% sample loss just by choosing Temperature limit for PTFE/Silicone septa: -60°C up to 200°C.
The high-grade autosampler vials are ideal for sample Screw cap, 9 mm, blue PP, non-slitted/bonded, white PTFE/red SL septa. 100/Pk. MK-16349-09.
Caps with bonded septa resist dislodging during injection when using Open Short Screw Vial Clear Yes Pink Red PTFE/White Silicone.
Shop our large selection of laboratory supplies. Clear Glass Vial, Bonded PTFE/Silicone Slit Septa. Capacity, 2ml. Glass Color, Clear.
Item no. GLC-01058 at Qorpak.com: 27.75 x 57mm, 5 dram (20ml) Amber Borosilicate Glass Vial with 24-400 Green PP Hole Cap & PTFE/Silicone Septa attached.
Waters Autosampler Vials, Plates, and Seals for Use Waters recommends pre-slit PTFE/silicone septa, for venting and accurate sample draw.
vials. Septa are white silicone rubber bonded with white PTFE face. All 3mm thick. Septa resist Laboratory Glassware & Equipment Catalog for a full.
Results 1 - 30 of 52 thickness 11 mm × 0.060 in., for use with 4 mL vial. View Pricing. Septa, Thermoseal®, pkg 100 High temperature PTFE/silicone, diam ...
9 mm Screw-Top Vials and Caps with Bonded-In Septa. • Sample volume range from 0.2 to 1.5 mL. Vial Kit, 9 mm, 2 mL Clear. + PTFE/Silicone. Vial Kit, 9 mm,
SSP supplies open-top polypropylene screw caps for 12x32mm vials used with autosamplers, laboratory equipment for automated sample processing.
With Advanced Vial Closure System (AVCS) technology built into 9mm Thermo Scientific™ 9mm Autosampler Vial Screw Caps and Septa you will get an optimal,
PTFE Silicone Septa Fit on Autosampler Vials, Find Details about PTFE Silicone Septa, Glass Vials with Caps from PTFE Silicone Septa Fit on Autosampler
In analytical laboratories, syringes are inserted through open-top caps fitted with septa liners into vials and volumetric flasks. PTFE/silicone septa are also
Aijiren provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE