These are vials are suitable for use when sample volume is limited or when you need to get maximum recovery from the vial. These vials allow small volumes to be sampled accurately by autosamplers with a recoverable volume of much less than 100 µL. High recovery, total recovery and vials with fixed inserts are all classed as microvials.
Autosampler Vials, 12x32mm with 9mm Screw Thread. labForce® (a Thomas Scientific Brand) labForce Brand autosampler vials, 12x32mm with 9mm screw thread are designed to work in robotic arm autosamplers. Manufactured from Type I borosilicate glass Designed to work in robotic arm autosamplers Available with graduated marking spot Made in the USA.
Kinesis SureStop 9 mm Short Thread Autosampler Vials have been designed with an over-wind barrier, preventing the cap/septa from being overtightened (see Figure 1). This ensures the septa is not deformed, minimising damage of autosampler needles and preventing sample evaporation due to poor vial-septa-cap sealing. The SureStop vials are fully compatible with all Kinesis Short Thread Caps and Septa, offering the full range of cleanliness and septa injection options.
Superior quality N-51A clear borosilicate glass 5mL sample vial is designed for use in the Shimadzu™ Model ASI-5000 Screw thread vial fits standard 10-425 closures (included with pre-assembled product) Open-top vial was designed in cooperation with the original equipment manufacturer
High Quality 2ml HPLC and GC Autosampler Vials. Micro vials are designed to assist in the consistent sampling of low-volume chromatography samples. Diameter (Metric) Outer: 11.6 mm. Volume (Metric): 0.36 mL. For Use With (Application): GC, HPLC. Neck Style: Short Thread. Shape: Flat Bottom. Height (Metric): 32 mm.
National Scientific VialsNational Scientific Vials found in: Vial, Autosampler, Thermo Scientific National; Target DP; Robovial; Screw Thread, Vial Racks for 2mL and 4mL Vials.L Tel: 8618057059123 E-mail:market@aijirenvial.com
Autosampler Vials, Caps, and Closures. Ideal for storage purposes when used with closed top screw seals. These 13mm vials are 4mL, 15x45mm vials with 13-425 thread finish. They are manufactured from high-quality glass and fit a variety of autosamplers. Rounded or flat bottom.
Thermo Scientific™ Screw Vial Convenience Kit, 40mL clear glass vial with open top septa caps, Clear Glass, 40mL, With Septa Caps. Store your samples in these vials to eliminate leaching of ions while maintaining a consistent pH for the life of your sample. Storage vials range from 2mL to 40mL. Pricing & Availability.
In our range, you will find vials with the following closures: headspace edge (chamfered edge), DIN roll edge (flat edge), special roll edge for SPME vials (thicker roll edge), snap ring, melted edge (flat bottom glass), short thread ND9, fine thread ND18 for headspace and SPME, snap lid edge (sample storage vessel, no autosampler bottle).
Autosampler Vials, Caps, and Closures DWK Life Sciences Kimble™ Open-Top PolypropyleneScrew Thread Closures with Red PTFE-Faced Silicone Septa Autoclavable and used for multiple injections
CleanPack, vials are packed in a clean room under class 10 000 conditions. Standard autosampler vials for GC and HPLC. Sample vials ROTILABO ® with short thread ND9
Short Thread 9mm Clear Glass 1.5mL HPLC Autosampler Vials - 100/pk, CV1828 + Price $5.12. Quantity. Select Caps without Septa (Optional) 1 x Screw Top 9mm Blue Plastic Vial Cap - 100/pk, CV1806 + Price $11.76. 1 x Screw Top 9mm Blue Plastic Closed Top Vial Cap - 100/pk, CV1807 + Price $11.76.
Thermo Scientific™ 9 mm Autosampler Vial Screw Thread Caps. Prevent septa push through and over- and under-tightening. With AVCS built into these 9 mm screw caps you will get an optimal, consistent seal every time. Manufacturer: Thermo Scientific™ 60180729. View more versions of this product.
4mL Clear Assembled Vial Kit - Screw Thread Vial, PTFE/Silicone Septa Packed in 4mL Clear Screw Thread Vial w/w/Numbered Marking ID Patch {15x45mm} Sample Handling - Vials - NET. VIALS. 13 - 26. Sample Vials. Autosampler Vials, Caps, Septa, and Inserts Most vials are offered with or without write-on marking spot or “patch”. For.
The dram/sample vials are available in clear or amber Type I borosilicate glass assembled with solid top or open hole black polypropylene screw thread closures. The solid top closures are lined with PTFE/F217 material and the open hole closures have PTFE faced silicone septa assembled in the