Vials must be inert and free of extractables or leachables to prevent affecting results. Using certified, application-specific, contaminant-free vials can significantly reduce risk. We offer a broad spectrum of Supelco ® products including autosampler vials, general-purpose vials, and vial accessories for sample collection, storage, and
1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials
Wish Lists. Compare. Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, 2 mL Volume. $142.80 $138.52. Wish Lists. Compare. Clear Glass 15 x 45mm Screw Neck Total Recovery Vial, 100/pk. $210.00 $203.70. Wish Lists.
Autosampler Vials, Caps, and Closures DWK Life Sciences Kimble™ Open-Top PolypropyleneScrew Thread Closures with Red PTFE-Faced Silicone Septa Autoclavable and used for multiple injections
VIALS | AUTOSAMPLER VIALS Vial and Kit Types / Designations Type Description Assembled Kit Caps are already assembled onto the vials Bonded Cap Septa bonded into cap Certified PLUS Designated “Cert+”. Depends on the product and is defined separately as, e.g., “Low Bleed” (caps), “MSQ”, or Mass Spec Quality (caps, vials and kits), etc.
Sample Vials Reduce failed assays with Waters glass and plastic autosampler vials and high sample recovery vials - certified/tested by HPLC, GC, and MS. Plates Browse 96- and 384-well plates that meet ANSI and SBS standards, offer various sealing options and fit numerous manifolds, autosamplers and robots.
6705-H102B Eppendorf tube rack, 50 vials, Tube type: 3810 6705-H103A Micro vial rack, 84 vials, vial size: 7 x 32 mm 6705-H104A Micro vial rack, 84 vials, vial size: 6 x 32 mm 6705-H117A Microplate rack, 96-wells or 384-wells Sample vial rack for AS-2057 6705-H111A Cooling standard vial rack, 50 vials, vial size: 12 x 32 mm
The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.
Low Flow to High Flow, and adjust to the desired pressure (50-80 psi). Dry for approximately 5 minutes. Turn the flow rate selector to Off. Raise the manifold, and slide the platform forward. 15. Collection: Replace the waste plate/rack with the appropriate collection plate/rack with test tubes or autosampler vials. Add elution solvent
Our chromatography and autosampler vials come in versatile designs for superb performance. The variety of styles and septa materials are available to match your equipment and applications. Headspace vials have round shoulders and bottoms to allow for even heating. We also offer vials to fit instruments that use 1- and 4- mL vials. APPLY FILTERS.
Autosampler Flow Path: Biocompatible: Maximum back pressure: 345 bar: Vial/plate dimensions: well plate dimensions according to ANSI SLAS 4-2004 (formerly ANSI/SBS 4-2004) max. plate/vial height: 47 mm (incl. septa or capmat) Injection volume range: 0.1 µl - 10 ml depending on sample loop: Sample loop: 100 µl: Dispenser syringe: 250 µl: Headspace pressure
Dec 16, 2020 · Max Pressure 6,300 psi; CBD, Benzoic Acid Certified HPLC Calibration Standards, Standard containing 12 cannabinoids. ... 100×1.8mL autosampler vials with PTFE ...
Nov 09, 2020 · SIL (autosampler) Plate to set eighty-four 1 mL sample vials. Plate to set fifty-four 1.5 mL sample vials. Plate to set fifty-four 1.5 mL sample vials. Plate to set twenty-eight 4 mL sample vials. There are glass and plastic (polyethylene) sample vials. If a vial is used incorrectly or the selection is incorrect, a problem may occur during
Autosampler Flow Path: Analytical: Maximum back pressure: 1240 bar: Vial/plate dimensions: well plate dimensions according to ANSI SLAS 4-2004 (formerly ANSI/SBS 4-2004) max. plate/vial height: 47 mm (incl. septa or capmat) Injection volume range: 0.1 µl - 10 ml depending on sample loop: Sample loop: 10 µl: Dispenser syringe: 250 µl: Headspace pressure
Aijiren headspace vials are offered as 10 mL vial and 20 mL certified screw vials and certified crimp vials, clear glass or amber glass headspace vials and associated 11 mm crimp caps , 18 mm screw caps, 20 mm crimp caps and 22 mm crimp caps while being are engineered to prevent sample contamination providing a consistent, secure seal of the .