Wide-opening 2 ml, 12 x 32 mm vial Superior 33 expansion borosilicate glass Meets extremely tight tolerances I-D vial with write-on patch measures 0.5, 1.0 and 1.5 ml 1230W33 Convenience Kit contains 100 Target Snap-It Clear Vials with Clear Seals with Red PTFE/White Silicone Septa.
RAM™ Large Opening Vials, 12x32mm, 9mm Neck Finish. having a chemical reaction during sampling. testing, storage, or transport. 31509P-1232 9mm R.A.M.™ Black Closure, Bonded PTFE/Silicone Septa w/Slit. Get Price.
Pre-slit PTFE/Silicone Septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics. The septum is provided with a thin 0.005” PTFE layer laminated to highly pure silicone, and slit through the center for easier needle penetration and to
ENVIRONMENT. Total Recovery vial. maximum residual volume. 186000385c, LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, Total Recovery, with Cap and Preslit PTFE/Silicone Septum, 1 mL Volume, 100/pk. 600000671CV - LCMS Certified 12x32mm Total Rec Pre-slit cap, 100/pk.
Vials, LC, 0.2uM PVDF Filter, 12x32mm with Pre-Slit Septa, 200/cs Use in any HPLC or GC autosampler rack that accepts 12x32mm 2mL vials. Needle stroke must be set to 5mm from the bottom of the vial. Requires a minimum sample volume of 250 uL, maximum sample fill volume 450 uL, filter dead volume 120 uL.
Clear vials + open caps + Silicone/ PTFE seals (100 u) Amber vials + open caps + Silicone/ PTFE seals (100 u) 2mL 12x32mm 8mm 360193 296624 690230 690300 690370 690440 4mL 15x45mm 13mm 181854 360163 690240 690310 690380 690450 8mL 17x60mm 15mm 181860* 667620* 690250* 690320* 690390* 690460* 12mL 19x65mm 15mm 667630* 667640* 690260* 690330
The dimensions of autosampler vials vary. Most autosamplers are equipped w ith trays that use 12x32mm vial configurations but some like the Waters Wisp require a 15x45mm configuration. Consult your autosam pler’s operating manual or manufacturer to determine the vial dimensions required. Sample Volume
septa 12 mL, max. pressure 180 psi MRQ30 Clear CD Vial ™, Blue cap, Pre-slit TEF/Silicone ... Aluminum cap and red PTFE/silicone septum, for autosampler vials ...
Our Editor 10 lab autosampler vials Review: 1. Autosampler Vial – 2ml HPLC Vial | 9-425 Amber Vial with Blue Screw Caps | Writing Patch | Graduation | White PTFE & Red Silicone Septa Fit for LC Sampler (1000pcs) Features : 2ml Clear autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC
Interlocked TM Vials are also available Silanized Standard Opening Screw Th read Vials, 12x32mm, 8-425mm Neck Finish J.G. Finneran Associates, Inc. — Visit www.JGFinneran.com • 1-800-552-3696 • 1-856-696-3605
SCION Instruments offers a range of sample vials and caps from the regular 2ml autosampler vials up to 40 ml EPA vials. Caps/septa are also available in different materials (including magnetic), a selection of clear glass and amber glass, screw or crimp vials, and writing labels for sample information. SCION vials, caps and septa have been
LCMS Certified Clear Glass 12 x 32 mm Screw Neck Total Recovery Vial, with Cap and Preslit PTFE/Silicone Septum, 1 mL Volume, 100/pk. Get maximum sample capacity (~ 1mL) with minimum residual volume (~9μL) with the LCMS Certified Clear Glass 12 x 32 mm Screw Neck Total Recovery Vial. These vials are designed specially to be used with the side
Autosampler Vials - Precision Labware Vials are manufactured from amber Type 1 borosilicate glass and have graduated (0.5-1.5mL) write-on spot. Vials are tested and guaranteed to meet or exceed critical performance parameters.
These Wheaton 9mm polypropylene screw caps are designed for use with ABC Vial™ threaded autosampler vials. The cap features the Wheaton "Super Septa", low extractable septa that is optimal for gas chromatography/mass spectrometry (GC/MS). The cap has a 0.005-inch red PTFE/0.035-inch white silicone liner with a slit. Cap Thread Size: 9mm.
Your lab will benefit from the carefully HPLC tested quality of our vials, as well as our Blue, 12 x 32 mm Screw Neck Cap and Preslit PTFE/Silicone Septum, 100/pk allowing for tests without chemical contamination. With an industry-leading combination of screw caps and clear glass, these Waters vials can hold 2 mL and are available in packs of 100.