Crimp neck vials, ND11. Vials Chromatography Vials. These vials are for use on instruments from the following manufacturers: Aijiren, Carlo Erba, CTC, DANI, Fisons, Gerstel, Jasco, PerkinElmer, Shimadzu, Spark, Thermo Scientific, Varian, etc. Standard vials for GC and HPLC. Vials with a barcode label, pre-crimped vials are also available.
Standard Opening crimp neck vial for hplc system- Aijiren Crimp Vials 2ml clear or amber autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are
These beveled neck vials are available in both 6mL, 10 mL and 20 mL capacities, flat or rounded bottom. Screw – Screw headspace vial is easy to use, no need to use tool Crimp – squeeze the septum between the rim of the glass v ial and the crimped aluminum cap.
A broad selection of ND8* crimp neck vials and microvials are available, which can closed with 8 mmm aluminium caps, 9mm PE caps or 8mm push-on caps. Note that some microvials may need an adapter for full autosampler compatibility as typically they have a conical base and are therefore not free-standing.
LLG-Headspace-Precision Thread Vials ND18 | Lab UnlimitedLLG-Crimping Tools ND8/ND11/ND13/ND20. LLG-Headspace Seals ND20 (Pressure Release Caps), Aluminium, ready assembled.
Injection Vials in Clear & Amber Glass - Lab UK. Description. This range of injection vials is manufactured from borosilicate type I glass with a crimp finish and are suitable for autoclaving. The injection vials are available in 2ml, 3ml, 5ml, 10ml, 20ml, 30ml, 50ml, 100ml & 200ml sizes plus more on request. We can supply both clear and amber injection vials and also the crimp caps and stoppers which are sold separately.
Crimp neck vials, ND8. These vials are for use on instruments from the following manufacturers: Aijiren, Beckman, Carlo Erba, CTC, Fisons, PerkinElmer, Shimadzu, Thermo Scientific, VWR/Hitachi, more. Broad selection of crimp neck vials ND8 available: crimp neck vials and micro vials ND8 can be closed with 8 mm aluminium caps, 9 mm PE caps or
10mL Serum Vials, Clear USP Type 1 Glass, unique 13mm crimp finish, 22x52mm, sold as a ream of 273 pieces pieces. Commonly referred to as an "insulin vial" because of the smaller 13mm crimp neck finish. The smaller 13mm crimp finish requires 13mm seals and stoppers (allows for the use of small insulin syringes).
We can supply all your crimp cap / seals and vial stopper requirements. Simply select your required cap / seal type below to view our range. Call us on +44 1327 877774 or email sales@lab-uk.com Product Compare (0) Sort By: Show: Flip Off Caps / Seals
Crimp neck vials, E-Z Vial®, WHEATON® Supplier: DWK Life Sciences Description: E-Z Vials are manufactured from Type I borosilicate glass and feature a 40% larger neck opening than standard opening vials.
Aluminum Crimp Caps For GC – Autosampler Vial, Hplc Vial 20mm Open Top Aluminum Crimp Cap (10mm hole) with 20mm White PTFE/White Silicone Septa 3mm Thick. 100pcs/pk. * Product Introduction Constructed of aluminum, these crimp vials are ideal for use with your crimp neck vials.Aluminum crimps tightly around the neck for a tight seal.
Lab Unlimited provides you with a range of ND18 Screw Top and ND20 Crimp Top Headspace Vials, available from 5 to 50ml, in clear or amber glass. These headspace vials are ideal for work with autosamplers and other instruments. Either with flat or rounded bottoms, these vials are compatible with a wide range of manufacturers, such as Varian
9. 32 x 11,6 mm. screw neck vial with inner cone. 0,3 mL. 11. 32 x 11,6 mm. snap ring vial with inner cone. In order to optimally dissolve both short- and long-chain PFAS in the vessels, the sample solution should have a relative proportion of methanol of 40 - 60 %. Also, for reliable PFAS analysis fluorine-free septa are required to prevent
Crimp seals are available in a Range of Colours, Sizes & Styles Common Sizes: 13mm, 20mm, 32mm Colours: Natural, Blue, red, grey, green, yellow, black, white, pink, orange and purple and more. The seals can be customized with your logo when ordered in large quantities, please ask. We can supply all your crimp cap / seals and vial stopper requirements. Simply select your required cap / seal type below to view our range. Call us on +44 1327 877774 or email sales@lab-uk.com
Injection Vials in Clear & Amber Glass - Lab UK. This range of injection vials is manufactured from borosilicate type I glass with a crimp finish and are suitable for autoclaving. The injection vials are available in 2ml, 3ml, 5ml, 10ml, 20ml, 30ml, 50ml, 100ml & 200ml sizes plus more on request. We can supply both clear and amber injection.